FLES - Spray-n-gone

- removes glue from window films with two fingers in your nose
- does not affect substrates, rubbers, rebates and interior parts
- biodegradable

A worldwide headache cause is the removal of solar window film. And we mean especially the adhesive layer. Since the adhesive applied to such polyester films is different from conventional PVC films, it often sticks hard to glass.
The film itself comes off the adhesive, and so the adhesive remains on the glass.
On car windshields it is then completely invisible nestled into the grids, and on flat windows you have huge surfaces to strip of the hard adhesive layer. Very tedious work.

The SOTT Spray-N-Gone window film adhesive remover is the solution for this.
It simply and easily dissolves the adhesive within a few minutes.
The adhesive softens and can be easily removed.
Afterwards, SOTT Spray-N-Gone works as a perfect surface cleaner to leave the substrate completely 100 % clean. Does not affect anything.
Completely harmless to the environment.

Instructions for use

1) Spray the adhesive layer that remains when the window film (tinting film) is removed.
2) Let it soak in and use a plastic scraper or squeegee to scrape the adhesive together.
3) Use cleaning paper (300-040) to pick up the softened adhesive residue and wipe it off the surface. Repeat the procedure if necessary.
4) Then lightly spray the surface again and now clean it thoroughly with the SOTT UltraClean cloth (300-020) to leave a 100 % clean and degreased surface.

Characteristics 

removes adhesive from window films within minutes
removes grease residue, fingerprints, nicotine deposits, dirt, etc.
cleans glass, car paint and plastic
no ADR, no hazardous substance
no special protective equipment required
can be applied with cloth, brush, roller or sprayer