3M EDGE SEALER

- for sealing the edges of PVC films
- 0.23 L can

3M Edge Sealer 3950 is a colourless varnish that provides a water and dirt tight seal between the edge of self-adhesive PVC
films and the substrate. It can also prevent curling of the edges.

Edge Sealer is resistant to water, mild acids and salts. Not resistant to hydraulic oils and greases. Edge Sealer can be removed
with isopropanol alcohol and citrus-based cleaners.

How to use:

Before you begin, test it out to make sure that the Edge Sealer does not affect the substrate.
Substrate and film should both be degreased and clean.
Make sure that the film edge is well pressed in accordance with the film manufacturer’s guidelines.
Do not dilute.
Do not leave the lid off the jar for too long; this will shorten the life of the contents.
Apply the sealer with a 6mm thin brush in one smooth motion.
Make a 6-10 mm seal edge, covering both the film and the substrate.
Avoid gaps between different seal edges.
Allow the seal edge to dry for 24 hours.